Lift division

PA PA USA PAVE HEAT EXCHANGERS COOLERS FILTRATION CARTS
PA PA USA PAVE HEAT EXCHANGERS COOLERS FILTRATION CARTS

PA |  PA 3 Screw Pumps

Description

SEIM's PA-type screw pumps are designed specifically for use immersed in oil, to drive oil-hydraulic lifts. In addition to the standard range used worldwide, PA screw pumps are also available in the U.S.A. version.

Technical Specifications

Data installation
Installation Indoor or Outdoor
Environment Industrial
Temperature Amb. Min / Max -25°C (CS) and -40°C (LTCS) , storage only / 60°C *
Operating conditions
Fluids Fuels (HFO, LFO,MGO,DO,LSMGO); Mineral and synthetic lubricating oil;
Solids content 0% *
Viscosity range between 1.2 and 5000 cSt *
Speed between 750 and 3600 rpm *
Rotation (shaft view) Clockwise
Counter clockwise on request
TECHNICAL CHARACTERISTICs
Design available STANDARD SEIM, BV MODE II, RINA
Flow between 3 and 41 lpm
(between 0.18 and 2.46 m3/h; between 0.8 and 10.9 GPM) *
Suction pressure between -0.5 and 10 barg (between -8 and 146 psi) *
Delivery pressure 40 barg (581 psi) MAX *
Operating Temperature between 0 and 150°C *
Seal Type Not available
Bearing Radial ball
Bearing lubrication Self-lubricated
Driver AC or DC motor
Type of construction vertical submerged
IN/OUT Strainer or axial flange BSP
Safety valve Not available
Materials
Body / Flange Aluminum *
Screws Carbon Steel *

* For different values ​​contact Seim

copyright © Seim Korea Co., Ltd. All rights reserved.